Floor Sourcing Services
Home ASK Us Q&A

Q&A

If you have any needs or inquiry on China Floor Inspection about our Flooring Inspection Scope, China Flooring Supplier Information, Flooring Factory Situation or Inspection Charge, please don't hesitate to contact us.

Have A Question?
Subject : Q&A
  • ASK Us Detail


1. What do you inspect?

With our rich experience in flooring field, we only focus our energy on flooring product, which including hardwood flooring, engineered wood flooring, laminate flooring, WPC vinyl flooring, SPC vinyl flooring, LVT and bamboo flooring etc., so that we can be more professional to deal with the issues in inspection.

And our engineers are all have more than three years experience in flooring business.



2. What's the content of on-site inspection?

Because of the on-site condition, we can not bring lab equipment for inspection. And for fairness, we can't use the supplier's equipment either.

On-site inspection are mostly including raw material grade, dimension, rough moisture, cracks, deformation, coating adhesion, humidity, gloss, coating hardness, and the status of package and taping, such as marks, labels, etc..

If you need more and accurate inspection results, the lab inspection is a better choice, which may takes couple of days.



3. Can you do the inspection if I ordered in different cities in China?

Yes, we can. To ensure the high efficiency and best service, we input invest our resources in the biggest six flooring export areas in China, which are Shanghai, Guangzhou, Dalian, Hefei, Nanjing and Huzhou.



4. What's the quantity will you check in inspection?

Only if you asked, we will take 5% of your goods randomly as inspection sample, and the report will fully present what we know about the goods objectively.



5. Can you guarantee the tested goods will not have any quality problem?

No, we can't, and nobody can. We only submit the objective reality  to you of what we saw, and you are the one who will decide to accept or reject the goods. We'll do our best to reduce your risks, and try to solve the problems in inspection for you.

If a fault turns out to be our responsibility, we shall return all the charges.



6. How about the charge?

It depends on the quantity of your order, how many days for inspection, how many engineers will be occupied, etc.. Generally, the charge could be only US$220.00 (all inclusive) and up.


The above may not be able to contain all questions you could have, please don't hesitate to write us for further information.



A free consultation

We focus on floor inspections only, we try to help you to solve all the questions in flooring line.
Q&A

Related Products

SPC Flooring SPC Flooring

Engineered Wood & SPC Flooring

Size: 6/1.2x178x1220mm Joint: Click Lock Surface Treatment: Antique Embossed Moisture Content: 8~12% Transport Package: 10pcs/ctn 2.168SQM/ctn 15kgs/ctn MOQ: 300 SQM *Note: Pic 1. of left is for the surface, and Pic.2 is the back side.

3-Ply HDF Engineered Eucalyptus Flooring 3-Ply HDF Engineered Eucalyptus Flooring

3-Ply HDF Engineered Eucalyptus Flooring

Size: 12/1.2x140x1200mm Joint: Click Lock Coating: UV Lacquered MOQ: 300 SQM

SPC Floor Quality Control SPC Floor Quality Control

SPC Flooring Inspection

Inspection the SPC Flooring Quality Before Shipment / Floor Inspection

Vertical Engineered Wood Flooring Vertical Engineered Wood Flooring

Vertical Engineered Wood Flooring

Top Solid Wood Veneer:  The strip is thinner and less evident - strips of wood are individually glued together vertically to form the plank,  vertical construction has a more subtle appearance, with a cleaner and more consistent surface visual Similar Products: Carbonized Vertical Bamboo Decking Vertical Bamboo Indoor Flooring

cork flooring reviews cork flooring reviews

Cork Flooring Standard

Standard Specification for Types Of Cork Flooring, Cork Floor Tile Inspection, Cork Flooring Problem.

SPC qualified standards, quality control check list SPC qualified standards, quality control check list

SPC qualified standards, quality control check list

1.  Appearance & Quality Requirements Defects Items Standard Defects, fissures, wrinkles, holes Not allowed (a)Offset printing, delamination, peeling Not allowed (b)Spots, bubbles, scratches, discoloration etc. Not obviously (a) is suitable for heterogeneous floor (b) can be agreed according to the contract between the supplier and the buyer   Item Superior product Qualified product Frosting mark and water mark Not allowed  ≥ 3% the area of the board Scratches Not allowed Press mark Not allowed Previous spots of impregnated paper Not allowed Gloss unevenness Not allowed  ≥ 3% the area of the board Spots,dirt and similar surface defects Not allowed ≤ 10mm², 每米长允许一个allowable 1pc/m Blister Not allowed Bubble Not allowed Tearing of impregnated paper Not allowed Bare substrate spots due to defective surface covering Not allowed Fissure on the surface Not allowed Delamination Not allowed Tongue and corner deformity Not allowed   2. Size And Deviation Length  ≤ 0.1% of length Width ≤ 0.2mm, the difference between the maximum and minimum values ≤0.1 mm mm +0.13mm to -0.10mm,最大值与最小值绝对值不超过(maximum variation)≤0.1mm Straight Angle qmax≤0.20mm straightness smax≤0.20mm Height difference average value ≤ 0.10mm, Hmax ≤ 0.15mm Gap average value≤ 0.07 mm, Gmax ≤0.1 mm Model of click 应与确认的钢模相同should be the same as the confirmed steel model   3. Physical And Chemical Performance Requirements Gloss matte (3~10)±2° semi-matte (15~25)±2° glossy 25以上(more than 25)±2° Tensile Strenght 5cm/120N: 4.0mm≥100N 5.0mm≥120N Ply Adhesion 60N/5cm Curl after 6hrs at 80℃ Laboratory Oven for 6hrs&80℃ then measure with a Vernier: ≤1mm Dimensional Stability Laboratory Oven for 6hrs&80℃ then measure with a Vernier:≤0.1% Dimensional changes after heating WPC 65℃≤0.2%,SPC 80℃≤0.1% abrasion resistance  ≥0.015g/1000转(r) Abrasion resistance Paint film scriber ≥4B Surface scratch resistance Surface decorative pattern is not scratched under 4.0N's force. Indentation ≤0.05mm Formaldehyde release  No Formaldehyde Bibulous rate ≤3%     Packing Product Mark Before the products are stored, they should be tagged in proper parts with their product models, trademarks, production dates, etc.   Packing Mark The standard codes , factory name, address, product name, production date, trademarks, specifications, formaldehyde release sign, type, grade, quantity, etc.   Package A product shall be packed based on its category, specification and grade. The enterprises shall provide detailed instruction books and manuals according to the characteristics of a product. The package shall protect products from being hit,scratched or stained. Packing requirements shall only be settled after negotiation between two parties.

Inspection on WPC Vinyl Flooring in Changzhou Inspection on WPC Vinyl Flooring in Changzhou

Inspection on WPC Vinyl Flooring in Changzhou

Date: Nov. 28, 2017 Location: Changzhou, China Inspection  Object: 1240×178×5.5mm WPC vinyl flooring

bamboo walls construction bamboo walls construction

Carved and Acoustical Bamboo Wall Panels

Groove acoustic panel is the common sound absorption materials in modern buildings. The structure of groove in surface and perforation in back is base on scientific calculation and acoustic theories. The panel has excellent noise reduction and sound absorption performance, especially for medium and low frequencies.         

OUR

NEWSLETTER

   

A free consultation

We focus on floor inspections only, we try to help you to solve all the questions in flooring line.