Floor Sourcing Services
Home ASK Us Reference Standards SPC Flooring Technical Data Sheet

SPC Flooring Technical Data Sheet

CFI give you all the technical data necessary to choose the right vinyl flooring tiles for your commercial project.

Have A Question?
  • Reference Standards Detail
TEST ITEMS
TEST METHODS
SCOPE
TEST RESULTS
Length
ASTM F2055-10
1524mm±2.0mm
1524mm
Width
228±0.2mm
228mm
Squareness
≤0.25mm
0mm-0.06mm
Total thickness
ASTM  F386-11
4.2±0.15mm
4.2mm
Thickness of wear layer
ASTM  F410-08(2013)
/
0.3mm
Residual indentation
ASTM F1914-07(2011)
Average value: ≤8%
Max Value: ≤10%
Average: 0.6%
Dimensional stability
ASTM F2199-09(2014)
≤0.17%
Lenth Direction:-0.01%
Width Direction:-0.02%
Resistance to Chemicals
ASTM F925-13

No more than a slight change in surface dulling,

 Surface attack or staining

Rating 0: No change
Resistance to Heat
ASTM F1514-03(2013)
Average value: E*ab≤8.0
Average E*ab: 0.66
Light Stability
ASTM F1515-15&ASTM D2244-16
Average value: E*ab≤8.0
Average E*ab: 1.7
Static laod
ASTMF970-17
/
0mm
Curling
ASTM F2199-09(2014)
Max: 2mm
0mm
Abrasion Resistance
ASTM D4060-14
/
Weight loss: 108mg 
Abrasion index: 21.6
Phthalates (DBP/BBP /DEHP/DINP/DNOP/DIPP)
EN14372:2004
0.003%(w/w)
ND
STC
ASTM E90-2009
/
62
IIC
ASTM E492-09
/
65
Reaction to fire class
EN ISO 9239-1/EN ISO 11925-2
Critical heat flow ≥8.0kw/m2
Bfl-s1
Sliding behaviour
EN 13893:2003
Class DS
Certification
DIBT/FLOORSCORE/CE/A+

DBP: Dibutyl Phthalate
BBP: Benzylbutyl Phthalate
DEHP: Bis-(2-ethylhexyl) Phthalate
DINP: Diisononyl Phthalate
DNOP: Di-n-octyl Phthalate
DIDP: Diisodecyl Phthalate

A free consultation

We focus on floor inspections only, we try to help you to solve all the questions in flooring line.

Related Products

Wood Plastic Composite Flooring Wood Plastic Composite Flooring

WPC Flooring Standard GB/T24508-2009

WPC Flooring Standard of Size, Appearance, Defects, Physical And Chemical Performance And Lab Testing methods.

Parquet Flooring Parquet Flooring

Multiple Wood Flooring Standards GB/T 18103-2000

Standard Specification for Engineered Wood Flooring , Engineered Wood Flooring Appearance, Engineered Wood Flooring Quality Requirements.

cork flooring reviews cork flooring reviews

Cork Flooring Standard

Standard Specification for Types Of Cork Flooring, Cork Floor Tile Inspection, Cork Flooring Problem.

Strand Woven Bamboo Flooring Strand Woven Bamboo Flooring

Strand Woven Bamboo Flooring Standard GB/T 30364-2013

Standard Specification for Outdoor use the anti-corrosion of real wood floor, Outdoor use the anti-corrosion of real wood floor Appearance And Quality Requirements.

Hardwood Flooring Hardwood Flooring

Hardwood Flooring Standard

Standard Specification for Hardwood Flooring,Hardwood Flooring Appearance, Hardwood Flooring Quality Requirements.

Laminated Floor Laminated Floor

Laminate Floor Standard GB/T 23471-2009

Standard Specification for Laminate Floor, Laminate Floor Appearance And Quality Requirements.

High Density Fiberboard High Density Fiberboard

HDF Board Standard GB∕T 31765-2015

This standard specifies the definition, category, requirements,testing manners,rules of inspection, marks, package, transportation and storage of high density fiberboard.

Outdoor WPC Flooring QC Outdoor WPC Flooring QC

QUALITY CONTROL STANDARD-WOOD PLASTIC COMPOSITE FLOORING OUTDOOR 

QUALITY CONTROL STANDARD-WOOD PLASTIC COMPOSITE FLOORING OUTDOOR  SCOPE   This standard specifies the requirements of WPC floor for export, test methods, inspection rules and packaging, transportation and storage requirements.    TECHNICAL REQUIREMENTS  Size And Deviation  Length 0~+10mm, Negative tolerance is not allowed Width ±1mm, the difference between the maximum and minimum values ≤3 mm Thickness thickness<25mm, ±0.5mm thickness≥25mm,±1.0mm Tolerance on wall thickness ±0.5mm Structure wood plastic composite Bevel need negotiation by the Customer and factory Straight Angle ≤ 0.30mm Straightness ≤ 1.0mm Model of click should be the same as the confirmed steel model Note: No tongue WPC flooring does not required height difference and gap; If have tongue and groove, the width of tongue should be more than 3mm. For wpc flooring, the weight should be more than 95% of WPC weight which two parts agreed.   WPC Flooring Appearance & Quality Requirements  In addition to the design effect, the color should be uniform, the surface is flat, no scratch, no obvious concave and convex, the impurity, the end should be straight, no burr. Item Superior product Qualified product Color unmatching It is allowed if not too obvious Surface unevenness Not allowed It is allowed if not too obvious Split, crack Not allowed Spots,dirt and similar surface defects ≤4mm², allowable amount is 1pc/m ≤4mm², allowable amount is 3pcs/m Blister Not allowed Bubble Not allowed Trace grain Not allowed It is allowed if not too obvious Surface granular Not allowed It is allowed if not too obvious Incomplete sander-polishing Not allowed Tongue and corner deformity Not allowed The board face concave and convex is only used for judging the plane plastic wood floor   WPC Flooring Physical And Chemical Performance Requirements   Test Item Test method Standard  Water absorption of 24h At room temperature, the immersion time of the sample was 24h±15min ≤2.0%  State after heating( 120℃) (120±2)℃,(30+3)min No bubbles, cracks, pitting  Size change rate after heating(100℃) (100±2)℃,(60+3)min ±1.0% Density   ≥1.2g/cm³ surface abrasion resistance  100*100*1pc sample, install it on the wear tester. When grinding wheel weight (27±2) g, width (51.4±0.6) mm, sand paper 180#0/3 condition, wear 100 turns, remove the specimen from the surface and weigh it ≤0.10g/100r Shore hardness (D type) GB/T2411 ≥60 nail-holding ability surface GB/T 17657-1999 ≥1300N  side ≥1200N Four point bending strength QB/T 4161-2011 (appendix)A ≥18Mpa Four point flexural modulus of elasticity ≥1800Mpa Freeze thawing resistance 24h in room temperature water, then put in ( -29±1) ℃24h, finally put 24h in room temperature environment, then place room temperature 24h, measure bending strength load No skin, no crack, bending strength retention ≥90% degradation testing (1000h) The black label temperature is (65 + 3) C, relative humidity is (50 + 5)%, irradiance is 0.35W/m2@340nm, continuous illumination. Cycle period is 120min, where 102min does not spray water, 18min spray water, aging time is 1000h. The surface of the sample should not be seen by the naked eye, the skin or the crack, the hollow and the uneven color change. 色差color difference:ΔE≤9 Formaldehyde release GB/T17657-1999 ≤0.5mg/L 可溶性铅含量Soluble lead content QB/T 4161-2011 ≤90mg/kg 1. Not test the nail holding ability of a hollow WPC 2. Not test flexural strength and flexural modulus of elasticity when the WPC thickness over 50mm 3. Should grinding treatment of flooring surface when test degradation testing surface color change   PACKING  Product Mark Before the products are stored, they should be tagged in proper parts with their product models, trademarks, production dates, etc. Packing Mark The standard codes , factory name, address, product name, production date, trademarks, specifications, formaldehyde release sign, type, grade, quantity, etc. Package Should be fastened firmly, with plastic film or other soft material package, you need to use other special packing methods agreed by both sides of supply and demand. Transport It should be flat and stacked to avoid heavy pressure, rain prevention and sunscreen, light load and light load.

OUR

NEWSLETTER

   

A free consultation

We focus on floor inspections only, we try to help you to solve all the questions in flooring line.