Floor Sourcing Services
Home ASK Us Reference Standards Strand Woven Bamboo Flooring Standard GB/T 30364-2013

Strand Woven Bamboo Flooring Standard GB/T 30364-2013

Standard Specification for Outdoor use the anti-corrosion of real wood floor, Outdoor use the anti-corrosion of real wood floor Appearance And Quality Requirements.

Have A Question?
  • Reference Standards Detail

QUALITY CONTROL STANDARD-STRAND WOVEN BAMBOO FLOORING


SCOPE


This standard specifies the definition, classification, requirements, testing methods, testing rules and marks, package,transportation, and storage of strand woven bamboo flooring.

This standard is applicable to the flooring made from strand woven bamboo.


TECHNICAL REQUIREMENTS


Size and Deviation

Length: Indoor 0.5mm, outdoor 0.5mm

Width: Indoor 0.15mm, the difference between the maximum and minimum values 0.2mm;

      Outdoor 0.5mm, the difference between the maximum and minimum values 0.75 mm

Thick: Indoor 0.3mm, the difference between the maximum and minimum values 0.2mm;

     Outdoor 0.3mm, the difference between the maximum and minimum values 0.2mm

Warp: Width warp upon 0.2mm, width warp down 0.15mm;

Length warp upon 1.0mm, length warp down 0.5mm;

Straightness of the edges: 0.2mm

Height difference: indoor Hmax 0.3mm

Gap: Indoor 0.4mm

The difference of groove and tongue: Indoor: 0.1-0.4mm

Note: After negotiation between the supplier and the customer, products with other specifications can also be manufactured.


The Appearance & Quality Requirements


Indoor Strand Woven Bamboo Flooring

Item

Grade

Superior

Qualified

Unplanned,

planed trace

Surface

Not allowed

Side

Not allowed

Not obvious

Back

Allowed

Rabbet deformity

Length of deformity

Not allowed

Sum length 10% of board,

Per length of deformity 3mm

Width of deformity

Not allowed

40% width of tongue

Wane

Not allowed

Broken thorn (jump wire)

Not allowed

Split

Not allowed

Gap

Surface

Not allowed

Not obvious

Back

Not obvious

Glue line

Not obvious

Cutter and chatter mark

Not allowed

Not obvious

Pin hole (0.5 mm)

Surface

Not allowed

5 pcs/board

Back

Allowed

Nib

Not allowed

Not obvious

Exposed undercoat

Not allowed

Wrinkling

Not allowed

1% of board

Fatty edge

Not allowed

Not obvious

Blister (0.5 mm)

Not allowed

pcs/board

Staining

Not allowed

5% of board

Mildew/Mold

Not allowed

Not obvious

Decay

Not allowed

Note: "Not too obvious"--- under natural lighting conditions, with normal eyesight, at a distance of 0.4m from the flooring, it can not be observed with naked eyes easily.


Outdoor Strand Woven Bamboo Flooring

Item

Grade

Superior

Qualified

Unplaned

Surface, Side

Not allowed

Back

Allowed

Wane

Surface

Not allowed

Not obvious

Back

Allowed

Broken thorn

Not allowed

Not obvious

Split

Not allowed

Not obvious

Gap

Not obvious

Decay

Not allowed

Mildew/Mold

Not allowed

Not obvious

Rabbet deformity

Length of deformity

Not allowed

Sum length 10% of board,

Per length of deformity 3mm

Width of deformity

Not allowed

Scratches

Surface

Not allowed

Not obvious

Back

Allowed

Blister

Surface

Not allowed

Not obvious

Back

Allowed

Exposed undercoat

Not allowed

Pin hole

Surface

Not allowed

Not obvious

Back

Allowed

Wrinkling

Surface

Not allowed

5% of board

Back

Allowed

Rabbet deformity is applicable to inspection items with rabbets, for other types of flooring, they can be inspected after negotiation of two parties; "Varnished processing defects shall be applicable to painted outdoor strand woven bamboo flooring, for other outdoor strand woven bamboo flooring with other types of coating, they can be inspected after negotiation of both parties.

Note: "Not too obvious"---- under natural lighting conditions, with normal eyesight, at a distance of 0.4m from the flooring, it can not be observed with naked eyes easily.


Physical and Chemical Performance Requirements


Indoor Strand Woven Bamboo Flooring

Item

Technical data

Moisture content

6.0-15.0%

Density

0.80g/cm3, the difference between maximum and minimum value 0.10g/cm3

Width of water absorption rate

4.0%

Thick of water absorption rate

10.0%

Horizontal shear strength

12.0MPA

Wear abrasion resistance

≤0.15g/100r, coating film did not grind through

Film adhesion

level 3

Surface impact resistance

press mark 10mm, no split

Suface fouling resistance

No stain, no decay

Formaldehyde release

0.6mg/L (carb2)


Outdoor Strand Woven Bamboo Flooring

Item

Technical data

Superior

Qualified

Moisture content

6.0-15.0%

Density

0.80g/cm3, the difference between maximum and mimimum value 0.10g/cm3

Width of water absorption rate

3.0%

4.0%

Thick of water absorption rate

5.0%

10.0%

Horizontal shear strength

12.0MPa

10.0MPa

Vapor resistance of the surface

No fissure, no blistering

Anti-mildew and color variation resistance

Mildew/Mold

the damaged degree is 0

the damaged degree is 1

Stain fungus

the damaged degree is 1

the damaged degree is 2

Anti-corruption performance

Grade 1


PACKING


Marks

Grade, type, production date, inspector code and date of inspection shall be marked on the product, or marks shall be stamped on the product based on supply-demand contract.


Package

The name of manufacturer, factory, post code, contact, brand, standard codes for the execution of products, specification & dimensions, grade, color, quantity and date of production and etc.


Transportation

The way of delivery of products shall be decided by both parties. Surface scratches and bumps shall be avoided during transportation, and the goods shall be safe from the influence of rain, dampness, exposure to direct sunlight and distortion.


Storage

The products shall be laid evenly and tidily, the surface of board shall not in direct contact with the ground, and measures shall be taken to avoid distortions.Based on their category, specification & dimensions, color and grades, they shall be piled up independently with special marks on every stack. The site for storage shall be free of rain, dampness, strong sunlight and shall be kept away from fire sources.

A free consultation

We focus on floor inspections only, we try to help you to solve all the questions in flooring line.

Related Products

Wood Plastic Composite Flooring Wood Plastic Composite Flooring

WPC Flooring Standard GB/T24508-2009

WPC Flooring Standard of Size, Appearance, Defects, Physical And Chemical Performance And Lab Testing methods.

Parquet Flooring Parquet Flooring

Multiple Wood Flooring Standards GB/T 18103-2000

Standard Specification for Engineered Wood Flooring , Engineered Wood Flooring Appearance, Engineered Wood Flooring Quality Requirements.

cork flooring reviews cork flooring reviews

Cork Flooring Standard

Standard Specification for Types Of Cork Flooring, Cork Floor Tile Inspection, Cork Flooring Problem.

Hardwood Flooring Hardwood Flooring

Hardwood Flooring Standard

Standard Specification for Hardwood Flooring,Hardwood Flooring Appearance, Hardwood Flooring Quality Requirements.

Laminated Floor Laminated Floor

Laminate Floor Standard GB/T 23471-2009

Standard Specification for Laminate Floor, Laminate Floor Appearance And Quality Requirements.

High Density Fiberboard High Density Fiberboard

HDF Board Standard GB∕T 31765-2015

This standard specifies the definition, category, requirements,testing manners,rules of inspection, marks, package, transportation and storage of high density fiberboard.

Outdoor WPC Flooring QC Outdoor WPC Flooring QC

QUALITY CONTROL STANDARD-WOOD PLASTIC COMPOSITE FLOORING OUTDOOR 

QUALITY CONTROL STANDARD-WOOD PLASTIC COMPOSITE FLOORING OUTDOOR  SCOPE   This standard specifies the requirements of WPC floor for export, test methods, inspection rules and packaging, transportation and storage requirements.    TECHNICAL REQUIREMENTS  Size And Deviation  Length 0~+10mm, Negative tolerance is not allowed Width ±1mm, the difference between the maximum and minimum values ≤3 mm Thickness thickness<25mm, ±0.5mm thickness≥25mm,±1.0mm Tolerance on wall thickness ±0.5mm Structure wood plastic composite Bevel need negotiation by the Customer and factory Straight Angle ≤ 0.30mm Straightness ≤ 1.0mm Model of click should be the same as the confirmed steel model Note: No tongue WPC flooring does not required height difference and gap; If have tongue and groove, the width of tongue should be more than 3mm. For wpc flooring, the weight should be more than 95% of WPC weight which two parts agreed.   WPC Flooring Appearance & Quality Requirements  In addition to the design effect, the color should be uniform, the surface is flat, no scratch, no obvious concave and convex, the impurity, the end should be straight, no burr. Item Superior product Qualified product Color unmatching It is allowed if not too obvious Surface unevenness Not allowed It is allowed if not too obvious Split, crack Not allowed Spots,dirt and similar surface defects ≤4mm², allowable amount is 1pc/m ≤4mm², allowable amount is 3pcs/m Blister Not allowed Bubble Not allowed Trace grain Not allowed It is allowed if not too obvious Surface granular Not allowed It is allowed if not too obvious Incomplete sander-polishing Not allowed Tongue and corner deformity Not allowed The board face concave and convex is only used for judging the plane plastic wood floor   WPC Flooring Physical And Chemical Performance Requirements   Test Item Test method Standard  Water absorption of 24h At room temperature, the immersion time of the sample was 24h±15min ≤2.0%  State after heating( 120℃) (120±2)℃,(30+3)min No bubbles, cracks, pitting  Size change rate after heating(100℃) (100±2)℃,(60+3)min ±1.0% Density   ≥1.2g/cm³ surface abrasion resistance  100*100*1pc sample, install it on the wear tester. When grinding wheel weight (27±2) g, width (51.4±0.6) mm, sand paper 180#0/3 condition, wear 100 turns, remove the specimen from the surface and weigh it ≤0.10g/100r Shore hardness (D type) GB/T2411 ≥60 nail-holding ability surface GB/T 17657-1999 ≥1300N  side ≥1200N Four point bending strength QB/T 4161-2011 (appendix)A ≥18Mpa Four point flexural modulus of elasticity ≥1800Mpa Freeze thawing resistance 24h in room temperature water, then put in ( -29±1) ℃24h, finally put 24h in room temperature environment, then place room temperature 24h, measure bending strength load No skin, no crack, bending strength retention ≥90% degradation testing (1000h) The black label temperature is (65 + 3) C, relative humidity is (50 + 5)%, irradiance is 0.35W/m2@340nm, continuous illumination. Cycle period is 120min, where 102min does not spray water, 18min spray water, aging time is 1000h. The surface of the sample should not be seen by the naked eye, the skin or the crack, the hollow and the uneven color change. 色差color difference:ΔE≤9 Formaldehyde release GB/T17657-1999 ≤0.5mg/L 可溶性铅含量Soluble lead content QB/T 4161-2011 ≤90mg/kg 1. Not test the nail holding ability of a hollow WPC 2. Not test flexural strength and flexural modulus of elasticity when the WPC thickness over 50mm 3. Should grinding treatment of flooring surface when test degradation testing surface color change   PACKING  Product Mark Before the products are stored, they should be tagged in proper parts with their product models, trademarks, production dates, etc. Packing Mark The standard codes , factory name, address, product name, production date, trademarks, specifications, formaldehyde release sign, type, grade, quantity, etc. Package Should be fastened firmly, with plastic film or other soft material package, you need to use other special packing methods agreed by both sides of supply and demand. Transport It should be flat and stacked to avoid heavy pressure, rain prevention and sunscreen, light load and light load.

Plywood Plywood

Plywood Standard GBT 9846-2015

This standard specifies the definition, category, requirements,testing manners,rules of inspection, marks, package, transportation and storage of plywood for general use.

OUR

NEWSLETTER

   

A free consultation

We focus on floor inspections only, we try to help you to solve all the questions in flooring line.